Goeden avond Forumleden,
Laatste tijd lekker opgeschoten met mijn model van de ANTAR.
Relingwerk is bijna gereed.
Romp is klaar om in de epoxy lak te zetten.
Binnenkort beginnen met verlichting etc.
Gr. Menne Osinga
Scheepsmodellen / bouwtekeningen
Re: Scheepsmodellen / bouwtekeningen
- Bijlagen
-
- Antar_21_10_2017_a.jpg (131.77 KiB) 2428 keer bekeken
-
- Antar_21_10_2017_b.jpg (135.07 KiB) 2428 keer bekeken
Re: Scheepsmodellen / bouwtekeningen
Dat begint een mooi spulletje te worden Menne !.
Duidelijk herkenbaar hoor.
In het voorjaar de 1e proefvaart ?.
m.v.g., Roy
Duidelijk herkenbaar hoor.
In het voorjaar de 1e proefvaart ?.
m.v.g., Roy
Re: Scheepsmodellen / bouwtekeningen
Ziet er goed uit Menne! Krijg je onderdeks de spullen een beetje op hun plek? Al een keuze gemaakt voor de hoofdmotoren en de accu? Enig idee waar het ontwerp van deze boot vandaan komt? Voor een Hollandse werf toch wel een bijzonder model. Gr. Klaas.
Re: Scheepsmodellen / bouwtekeningen
Dag Forum leden,
Model van Antar schiet al op , dus nadenken over volgende.
Het plan was om de Alice L. Moran te bouwen.
Echter na diverse pogingen is het niet gelukt om aan tekeningen te komen.
Het nieuwe plan is om een ATA rescue tug uit WO 2 te bouwen.
Maar ook hiervan kan ik geen algemeen plan en lijnenplan op internet vinden.
Foto's genoeg, dus daar aan zal het niet liggen.
Wie kan mij helpen?
Gr. Menne Osinga
Model van Antar schiet al op , dus nadenken over volgende.
Het plan was om de Alice L. Moran te bouwen.
Echter na diverse pogingen is het niet gelukt om aan tekeningen te komen.
Het nieuwe plan is om een ATA rescue tug uit WO 2 te bouwen.
Maar ook hiervan kan ik geen algemeen plan en lijnenplan op internet vinden.
Foto's genoeg, dus daar aan zal het niet liggen.
Wie kan mij helpen?
Gr. Menne Osinga
- Bijlagen
-
- images.jpg (5.78 KiB) 2275 keer bekeken
Re: Scheepsmodellen / bouwtekeningen
https://www.taubmansonline.com/TUGSTOWBOATSHEADER.htm
Zit hier iets voor je tussen Menne? Onder aan de lijst zie ik een paat rescue tugs. Helaas geen duidelijke plaatjes. Gr. Klaas.
Zit hier iets voor je tussen Menne? Onder aan de lijst zie ik een paat rescue tugs. Helaas geen duidelijke plaatjes. Gr. Klaas.
-
- Berichten: 281
- Lid geworden op: 25 sep 2006 23:29
- Locatie: Rendsburg/Duitsland
- Contacteer:
Re: Scheepsmodellen / bouwtekeningen
Hi all,
today I want to show you a little movie about the maidenvoyage of my J.J. Sietas type 28 coaster! You can watch it in 1080HD, if you take the right settings
Maybe you like it
Krgds
Arne
today I want to show you a little movie about the maidenvoyage of my J.J. Sietas type 28 coaster! You can watch it in 1080HD, if you take the right settings
Maybe you like it
Krgds
Arne
Re: Scheepsmodellen / bouwtekeningen
Klasse Modell, Arne. Einfach supi
Armin
Armin
Re: Scheepsmodellen / bouwtekeningen
Just a model to be very proud of, Arne! Good performance too. Regards, Klaas.
-
- Berichten: 281
- Lid geworden op: 25 sep 2006 23:29
- Locatie: Rendsburg/Duitsland
- Contacteer:
Re: Scheepsmodellen / bouwtekeningen
Hi guys,
many thanks for your kind words. Glad you like my little one !
Little cargo vessels like coasters are beauties and I was grown up with them. My hometown Rendsburg was a "coastertown", where lots of them could be seen in the 1970'ies and 80'ies. My own fleet includes such kind of cargo vessels, built by Sietas (HOHEBURG, NAUSICA), Nobiskrug (ANNEMARIE) and Holst (KÖHLBRAND).
But only one of all coasters got the stuff to became a german TV Star! "Unfortunately" it was a dutch built one ..! But that's not really a problem, because the Gebr. Sanders built AXEL was owned by Fritz Vollmers of Rendsburg, my hometown. We all knew this goldie as HENRIETTE II, which showed us the danish, dutch and german coastline in the 1970-80'ies. This one is my next project. It's difficult to get plans of the vessel so I have to reconstruct the hull by pictures. My advantage was to have some old photos from the keellaying (thanx to shipspotters NL), which showed the whole shape of the coaster. My intention is to build a dutch, a danish and a german coaster in nearly the same scale, because these vessels moulded our north european history.
The hull of the danish one would depict a vessel of Nordsoevaerftet Ringköbing. This one is nearly finished. It'll be named JENSTAR or ARLIL. A new or an older Serie 61 coaster. The reconstruction of the hull (general arrangement & ribs) was made by my colleague Ralph.
unknown copyright
1/35 scale hull/ dansk coaster Serie61 - 'glasfibered'/ constructed by Ralph-built by Arne:
The dutch Gebr. Sander built coaster is the next, I want to create. Scale ca. 1/35 and a length of 150cm. The reconstruction of the hull (general arrangement & ribs) was made by Arne/ myself.
*This one should sail in the end of 2018!
I don't know which german one I want to built. But I think, it would be one of Wewelsfleth, Husum or Büsum, because I have rebuilt to much vessels from Hamburg of Sietas in the past. I want to built one, which comes from my home of Schleswig Holstein:). May be one of the following ones:
PETIT FOLMER/ Husumer Schiffswerft:
Copyright by F. Olinga
BETTY C/ Hugo Peters/ Wewelsfleth:
Copyright by PWR
MARTA BOYE/ Büsumer Schiffswerft:
Copyright by tedingham
Krgds
Arne
many thanks for your kind words. Glad you like my little one !
Little cargo vessels like coasters are beauties and I was grown up with them. My hometown Rendsburg was a "coastertown", where lots of them could be seen in the 1970'ies and 80'ies. My own fleet includes such kind of cargo vessels, built by Sietas (HOHEBURG, NAUSICA), Nobiskrug (ANNEMARIE) and Holst (KÖHLBRAND).
But only one of all coasters got the stuff to became a german TV Star! "Unfortunately" it was a dutch built one ..! But that's not really a problem, because the Gebr. Sanders built AXEL was owned by Fritz Vollmers of Rendsburg, my hometown. We all knew this goldie as HENRIETTE II, which showed us the danish, dutch and german coastline in the 1970-80'ies. This one is my next project. It's difficult to get plans of the vessel so I have to reconstruct the hull by pictures. My advantage was to have some old photos from the keellaying (thanx to shipspotters NL), which showed the whole shape of the coaster. My intention is to build a dutch, a danish and a german coaster in nearly the same scale, because these vessels moulded our north european history.
The hull of the danish one would depict a vessel of Nordsoevaerftet Ringköbing. This one is nearly finished. It'll be named JENSTAR or ARLIL. A new or an older Serie 61 coaster. The reconstruction of the hull (general arrangement & ribs) was made by my colleague Ralph.
unknown copyright
1/35 scale hull/ dansk coaster Serie61 - 'glasfibered'/ constructed by Ralph-built by Arne:
The dutch Gebr. Sander built coaster is the next, I want to create. Scale ca. 1/35 and a length of 150cm. The reconstruction of the hull (general arrangement & ribs) was made by Arne/ myself.
*This one should sail in the end of 2018!
I don't know which german one I want to built. But I think, it would be one of Wewelsfleth, Husum or Büsum, because I have rebuilt to much vessels from Hamburg of Sietas in the past. I want to built one, which comes from my home of Schleswig Holstein:). May be one of the following ones:
PETIT FOLMER/ Husumer Schiffswerft:
Copyright by F. Olinga
BETTY C/ Hugo Peters/ Wewelsfleth:
Copyright by PWR
MARTA BOYE/ Büsumer Schiffswerft:
Copyright by tedingham
Krgds
Arne
Re: Scheepsmodellen / bouwtekeningen
mooie fotos van de coastertjes, Arne
Armin
Armin