Scheepsmodellen / bouwtekeningen

van: www.kustvaartforum.com
k-k
Berichten: 3532
Lid geworden op: 23 dec 2008 17.20 13:04
Locatie: Oostvoorne

Re: Scheepsmodellen / bouwtekeningen

Bericht door k-k » 20 jul 2017 17.20 20:36

Hello Arne, Sailing in the dark has an extra dimension. But if the navigation lights are OK it's good to see where your ship is going. And with a second toplight the course is clear enough. Nice pictures with the reflection on the water. Last Monday we were sailing with three of us and a good mix of models. Full speed my tanker sails much too fast. At dual rate it's better. With the first brushless 1200 KV motor she was even faster and pushed the bowwave as high as the bow. Now with the 750 KV motor it's better. The original, with her 18.000 HP Fiat was fast as well. If you are interested I can supply motor and ESC data. Including the programming card the costs for motor and ESC are about 30 Euro's. Now I'm waiting for a crystal set to improve my MPX RC set. Replacing the transmitter crystal and a ferrite ring in the receiver cable of the ESC did the tric. Regards, Klaas.



Nordmark71
Berichten: 161
Lid geworden op: 25 sep 2006 17.20 22:29
Locatie: Rendsburg/Duitsland
Contacteer:

Re: Scheepsmodellen / bouwtekeningen

Bericht door Nordmark71 » 07 aug 2017 17.20 19:03

Hi Klaas,
last Friday, I've been at Hobby Lobby Modellbau in Schenefeld near Itzehoe. I know the owners very well. Burghardt, the owner of HoLo has shown me a little brushless motor which used only a 7,2V Batterie for generating an output power of 200W :shock: !!! I don't use those engines for my models, but it's gigantic!

Last Saturday, I met 3 of my colleagues for a little fine RC-Meeting at our gravel pit lake. It was the first time I used my Nobiskrüger ANNEMARIE this year. The original was built in 1930 as a 3 mast schooner for J. Penns of Burg/ Dithmarschen. The vessel was one of a serie of 12 sisters. In the 1950'ies the ship was converted into a modern motorvessel. My model shows the vesselconditions of the 1960-70'ies.

ANNEMARIE in shallow waters:
Afbeelding


Full ahead (around 8.5 knots of the original) :wink: :
Afbeelding

Afbeelding

Afbeelding

Pic of the original by my good friend Ben Gernaat: http://img513.imageshack.us/img513/1382 ... ie1930.jpg


Sometimes the wind was blowing with 5 to 6 Bft. The vessel was rolling, when it gets the broadside and the depth was low. I only had a weight of 2kg onboard. 3.5kg is the Max!
Afbeelding


This could be the original :) :
Afbeelding

I have recorded a video of the last employment. If you like, you can watch it :wink:. Please take the high resolution of 1080p HD.



Krgds
Arne

PS: Congratulations to the winners of the women Soccer EM :wink: !!!

vchiu
Berichten: 2
Lid geworden op: 16 aug 2017 17.20 19:09

modelbouw

Bericht door vchiu » 17 aug 2017 17.20 14:20

Hello dear Forum Members

I am Valery CHIU from France /Paris. Present on this board in 2011 I am happy to be back to Ship modelling after a pause of many years.

Recently, I bought a kit from Turkmodels representing the LIMAN 2, a 1935 built of a preserved Steam Tug in Turkey.
The real one can be found here (from Shipsnostalgia)
Afbeelding

My 1/50 scale model being built is here :
P1020493-780.jpg
P1020493-780.jpg (96.78 KiB) 467 keer bekeken
P1020492-780.jpg
P1020492-780.jpg (46.17 KiB) 467 keer bekeken
P1020495-780.jpg
P1020495-780.jpg (73.97 KiB) 467 keer bekeken
P1020494-780.jpg
P1020494-780.jpg (52.9 KiB) 467 keer bekeken
This very nice tug was built in the Netherlands by the Kreber shipyards.
While building this tug, I saw that the information given in the kit was not accurate. When looking on the net, I have trouble finding good detail pictures of it.
Does some forum member know if the LIMAN 2 had sisterships or if the Kreber yard produced tugs of similar design ? I am looking for builders' plans with more details of deck fittings, Tug hook, Bollards and others.
I wish to put functional navigation lights, but I don't know where the rear light is.
Lastly, I am looking for a brass or bronze 4-bladed propeller of 30mm X 9 mm with M2 Thread. I just wrote an inquiry to Raboesch but maybe someone can suggest me another source ?

here is the Propeller place
P1020487-780.jpg
P1020487-780.jpg (64.73 KiB) 467 keer bekeken
Bedankt en vriendelijke groet

Valéry

Gert Schouwstra
Berichten: 3306
Lid geworden op: 28 okt 2006 17.20 20:24
Locatie: Sneek
Contacteer:

Re: Welcome back

Bericht door Gert Schouwstra » 17 aug 2017 17.20 16:56

Hello Valéry,

I suppose our moderator will relocate this posting, but here is what I could find.
The LIMAN II was commissioned in 1935 and delivered to the Turkish owners from the I.A. Kreber Shipyard at Vlaardingen at spring 1937. Built under class of Bureau Veritas and the Dutch Scheepvaartinspectie. Class 1 3/3 P with 200 hp Steam engine.
Gert
- Varen is leven. -
Neem gerust eens een kijkje op mijn website AA-planadvies.

vchiu
Berichten: 2
Lid geworden op: 16 aug 2017 17.20 19:09

Re: Welcome back

Bericht door vchiu » 17 aug 2017 17.20 19:18

Bedankt Zeer Gert

Best regards

Valéry

Nordmark71
Berichten: 161
Lid geworden op: 25 sep 2006 17.20 22:29
Locatie: Rendsburg/Duitsland
Contacteer:

Re: Scheepsmodellen / bouwtekeningen

Bericht door Nordmark71 » 08 sep 2017 17.20 18:00

Hi all,
today I want to show you some pics of my new project, a J.J.Sietas type 28 coaster. The original was built in 1965 for J. Penns in Burg/ Dithmarschen.
Afbeelding

The model was constructed by myself. The vessel has a glasfibre hull and wooden decks. The scale is 1/100, the dimensions are 61*10,5cm. I want to spend a 2 channel rc-system to her.


Some pics from my yard.

The scratch built hull:
Afbeelding


The decks, bulwarks and baseboards are glued onto the hull:
Afbeelding


The primed hull:
Afbeelding


"Fine tuning" of the hull. Derricks, hatches and superstructure of the vessel.
Afbeelding


For the paintworks I used my Tamiya Airbrush system.
Afbeelding

Afbeelding


I think, I've invested not more than 50 hours in the model jet. I hope this one will be an enrichment for our 1/100 scale fleet :? :wink: .


Krgds
Arne

k-k
Berichten: 3532
Lid geworden op: 23 dec 2008 17.20 13:04
Locatie: Oostvoorne

Re: Scheepsmodellen / bouwtekeningen

Bericht door k-k » 08 sep 2017 17.20 19:41

Very nice Schiffchen, Arne! Why not use a 4 channel set and do something with deck and navigation lights? And what about the engineroom? I know, I'm asking a lot, but you will have a plan, is n't it? 20 mm propellor? Regards, Klaas.

Nordmark71
Berichten: 161
Lid geworden op: 25 sep 2006 17.20 22:29
Locatie: Rendsburg/Duitsland
Contacteer:

Re: Scheepsmodellen / bouwtekeningen

Bericht door Nordmark71 » 09 sep 2017 17.20 06:49

Hi Klaas,
a justified question. I have an old 2CH 40MHz AM System, which is nearly 30 yers old. I don't want to buy some new equipment. But your idea is phantastic. I think about this interesting suggestion :wink: .


Krgds
Arne

k-k
Berichten: 3532
Lid geworden op: 23 dec 2008 17.20 13:04
Locatie: Oostvoorne

Re: Scheepsmodellen / bouwtekeningen

Bericht door k-k » 09 sep 2017 17.20 10:17

Arne, Small relais-switch over the motor poles can do the trick and feed the lights. Motor off, decklights on and navigationlights off. Motor on will switch the lighting. Relais should have a 3 pole connection for the lighting. Rgds. Klaas.

Nordmark71
Berichten: 161
Lid geworden op: 25 sep 2006 17.20 22:29
Locatie: Rendsburg/Duitsland
Contacteer:

Re: Scheepsmodellen / bouwtekeningen

Bericht door Nordmark71 » 10 sep 2017 17.20 15:23

Hello Klaas,
thats a good idea. I'll check it :wink: .

This weekend, I've been at a RC meeting in Aukrug near Rendsburg. A colleague is the owner of a big port facility. He had set it up at the pool.
Afbeelding

Afbeelding


It was the first time, I've been there with my coaster KÖHLBRAND. I want to show you some pics of my vessel during this fine event.
Afbeelding

Afbeelding

Afbeelding

Afbeelding


At the bunker station:
Afbeelding


The highlight! A meeting with a HDW-built cargovessel...
Afbeelding

Afbeelding


...and a J.J. Sietas type 168 feeder.
Afbeelding

Afbeelding


All ships have approximately the same scale of 1:50.
Afbeelding


Krgds
Arne



Plaats reactie